Part 2: Peruvian Goes with Apu to Source of Souls. Also Met Boeing Engineer Who Knew About UFO Bi/Mg Metal

– “The Apu told me these were soul energies in their natural state or place.”

– “I described the material as a sandwiched type of materials ...
when I added the bismuth, Boeing engineer turned very serious. I then said
the lab applied a voltage to it, and before I could say anything else,
he said ‘and it just floated into the air.’”

– Professional Engineer, now resident of Cusco, Peru region

Alleged extraterrestrial metal taken from the bottom of a “wedge-shaped craft in 1947” was created from alternating layers of 1-4 microns dark bismuth and 100-200 microns silver magnesium/zinc alloy, approximately twenty-five to thirty layers thick. Each of six pieces received had a curvature that tapered, as shown to the right in photo magnification above. Photograph by Tim Bauer for Linda Moulton Howe. See Websites at end of this Earthfiles report. — Alleged extraterrestrial metal taken from the bottom of a “wedge-shaped craft in 1947” was created from alternating layers of 1-4 microns dark bismuth and 100-200 microns silver magnesium/zinc alloy, approximately twenty-five to thirty layers thick. Each of six pieces received had a curvature that tapered, as shown to the right in photo magnification above. Photograph © 1999 by Linda Moulton Howe. See Websites at end of this Earthfiles report.

Return to Part 1.

July 5, 2014 Cusco, Peru - At the end of Part 1, Rob wrote, “Life in this material based world can make you forget who you are, a spiritual being, having a physical experience. This is not the only world where a soul can incarnate. There are so many more. Also have had visions of how new universes are created by very special soul energies.”

Click here to subscribe and get instant access to read this report.

Click here to check your existing subscription status.

Existing members, login below: